All posts

Google Ads Multiple Locations: Agency Account Structure

How to structure Google Ads campaigns for clients with multiple locations: shared budgets, location-specific ad groups, geo bid adjustments, and how Hellyeah manages multi-location accounts.

Yulong He
10 min read
Google Ads Multiple Locations: Agency Account Structure
On this page

Managing Google Ads for clients with multiple service locations is one of the fastest ways to misallocate spend at scale. A single campaign covering twelve markets will almost always over-invest in the easiest locations and starve the ones that actually need budget. Agencies that get this right build separate account architectures per client, set geo-targeting at the campaign level, and use bid adjustments to reflect the real cost-per-lead difference between a downtown market and a suburban one. Here is how to structure it cleanly.

Quick Answer

  • Use separate campaigns per location (or per metro cluster) so each gets its own budget, bid strategy, and geo-targeting radius. Never consolidate multiple markets into one campaign.
  • Set location targeting to "Presence" (not "Presence or interest") and add competing location names as negative keywords to stop locations from bidding against each other.
  • For 10+ locations, use a Manager Account (MCC) with one sub-account per client entity. The agency owns the MCC. Clients own their individual accounts.

The Three Account Structures and When Each Fits

There is no single correct structure for multi-location Google Ads in 2026. The right choice depends on how many locations the client has, whether those locations are owned by a single entity, and how much the agency needs to isolate data and billing.

One account with location-based campaigns works well for clients with two to ten locations under a single legal entity. You keep one conversion tracking setup, one billing relationship, and use campaign-level geo-targeting to isolate each market. The tradeoff is that all campaigns share the same account-level conversion history, which can be an advantage early on when one campaign builds Smart Bidding data that benefits the others.

MCC with sub-accounts is the structure that scales past ten locations or when locations have different owners. The agency holds the Manager Account (MCC). Each client entity gets its own Google Ads account, linked to the MCC. This separates billing, conversion data, and permissions cleanly. One account manager at the agency can oversee dozens of client sub-accounts from a single dashboard without the clients seeing each other's data.

Fully separate accounts outside an MCC is the least efficient structure for agencies. It works for a client who insists on managing billing themselves, but the agency loses cross-account reporting and cannot apply shared negative keyword lists from a central library. Avoid it unless the client contractually requires it.

The ownership rule matters for agency retention: the agency should own the MCC. The client should own their individual account. When the client leaves, the account stays with them; what the agency built inside it (campaign structure, negative lists, bid strategies) is proprietary to the engagement.

Separate vs. Consolidated Campaign Architecture

The most common mistake agencies make is building one campaign with location targeting set to all markets. This looks clean in the account dashboard but creates three real problems: budgets flow to whichever location has the highest click-through rate (usually the densest market), bid strategies optimize for average performance across markets rather than the best outcome per market, and you cannot see which location is actually profitable without manually filtering reports.

Separate campaigns per location solves all three. Each campaign gets its own daily budget, its own bid strategy, and its own geo-targeting. Keyword lists can be shared via the shared library, but the campaign structure itself is isolated.

For clients with 20 or more locations in the same metro area, grouping by cluster (rather than individual address) is practical. A cluster might be three or four locations within a ten-mile radius, treated as one campaign targeting that zone. The budget for the cluster reflects the total conversion potential of those locations combined.

For Search campaigns, set each campaign's location targeting to the city, postal code, or a radius around the specific location. Google supports radius targeting down to 1 km, which is precise enough to separate two nearby locations cleanly. Add the zip codes or city names of other client locations as negative locations to prevent crossover.

Performance Max campaigns need separate handling. PMax uses asset groups rather than ad groups, and its location targeting works at the campaign level. For multi-location clients on PMax, build one PMax campaign per location (or cluster). Asset groups within that campaign can test different creative angles, but they all share the same geo-targeting boundary. Do not build a single PMax campaign covering all locations and hope the algorithm distributes budget fairly. It will not.

Geo-Targeting Settings That Prevent Location Cannibalization

To prevent a client's locations from bidding against each other in Google Ads, set every location campaign to "Presence" targeting instead of "Presence or interest." "Presence" shows ads only to users physically located in the defined area. "Presence or interest" also shows ads to users who have searched for that location without being there, which creates overlap across markets. Next, add each other location's city name or zip code as a negative keyword at the campaign level. A user searching for "plumber Chicago" should not trigger the Detroit campaign. Finally, set radius boundaries that do not physically overlap. If two locations are twenty miles apart and you have set a 15-mile radius on each, there is a 10-mile overlap zone where both campaigns will compete for the same user. Tighten the radius or exclude the overlap zip codes explicitly.

The location exclusion list in the Shared Library is the most underused tool for multi-location management. Google's location targeting documentation covers bulk exclusion lists, but the agency application is specific: build one exclusion list per client and apply it across all campaigns in the account. When the client adds a new location, update the list once and all existing campaigns inherit the exclusion automatically. This removes the manual step of editing every campaign individually and eliminates the gap period where two campaigns overlap before the exclusion is applied.

Budget Allocation Across Locations

Most agencies default to equal budget distribution across locations. Equal distribution is almost always wrong. Locations differ in population density, competitive intensity, and historical conversion rate. A location in a high-density market with strong branded search volume needs more budget than one in a low-volume suburb, even if the client wants them treated equally.

The correct allocation method starts with cost-per-lead targets per location, not revenue targets. If Location A has a $40 CPL target and Location B has a $60 CPL target, their budgets should reflect the volume of leads each can realistically generate at those targets, not their relative share of the client's total revenue.

Rebalance monthly. Run a location performance report filtered by conversion rate and CPL. Move budget from locations beating their CPL target toward those that are below target but have capacity to scale. This is not set-it-and-forget-it. Multi-location budget management requires a monthly review cycle at minimum.

Shared budgets at the campaign level are worth considering only when locations are clustered and you want the algorithm to route spend toward the best-performing market within the cluster in real time. For most agency clients, campaign-level budgets with manual monthly rebalancing give more control and clearer accountability in reporting.

Author's Comment

"The decision I see agencies get wrong most often is treating budget allocation as a setup step rather than an ongoing product decision. When we built Managed Growth inside Hellyeah, the hardest part was not automating the bid adjustments, it was designing the surface that shows an account manager which location is underperforming and why, without burying them in a 20-tab spreadsheet. Agencies that manage this manually are doing the equivalent of reading a server log to debug a web app."
Yulong He, Product, Hellyeah AI

Bid Adjustments by Location

Location bid adjustments let you raise or lower bids for specific geographies within a campaign without restructuring the account. They are a tool for fine-tuning, not a substitute for separate campaigns. If Location A converts at twice the rate of Location B, a +50% bid adjustment in Location A reflects that difference without duplicating the campaign.

The limit of bid adjustments is transparency. They modify baseline bids mathematically but they do not create a clean separation in reporting. A campaign with ten location bid adjustments is harder to interpret than ten campaigns with separate budgets. Use bid adjustments for granular refinement within a campaign, and separate campaigns for structural separation between markets.

For Performance Max, location bid adjustments are not available at the same level of granularity as Search. This is another reason to use separate PMax campaigns per location rather than relying on adjustments inside a single consolidated PMax campaign.

How to See Location-Level Results Across a Client Portfolio

Agencies managing multi-location Google Ads accounts need two reporting layers: location-level performance within each client account, and portfolio-level visibility across all clients. Within a single account, the Locations report under Campaigns shows impressions, clicks, and conversions broken down by geographic segment. This report works at the campaign and ad group level. For accounts using separate campaigns per location, filter by campaign to see each location in isolation. For cross-client visibility, the MCC dashboard aggregates performance across all linked accounts. Set up custom columns in the MCC dashboard for CPL, conversion rate, and ROAS per account, then filter by label. Tagging each sub-account by industry, location tier, or client size lets you compare like-for-like performance without mixing B2B and B2C accounts in the same view.

Offline conversion imports are underused in multi-location management. If the client's sales team closes leads that came from Google Ads, the campaign-level data shows clicks and form fills but not actual revenue per location. Importing closed deals back as conversions via the Google Ads API or a CRM integration changes the optimization signal from "cost per form fill" to "cost per closed client." For clients with long sales cycles, this difference between locations can be significant.

How Hellyeah Manages Multi-Location Accounts

Running the structure described above manually across five or ten agency clients is achievable. Running it across thirty is where the operational overhead compounds. Each location needs its own campaign, its own budget review, its own conversion check, and its own geo-targeting verification. That is a lot of repetitive work before any actual optimization happens.

Hellyeah's Managed Growth handles the structural layer automatically. AIMA, the AI engine inside the platform, builds campaign architecture, sets location targeting boundaries, applies negative keyword lists across the account, and runs monthly budget rebalancing without a manual review cycle. Hellyeah's X-Ray surfaces location-level performance data in a single dashboard so account managers can see which markets are hitting CPL targets and which need intervention, without pulling individual reports per location.

For clients who need multi-platform visibility, Hellyeah runs Google Search and Performance Max alongside Meta, so location-level performance is visible in one view rather than across two separate reporting interfaces.

The customer results reflect what structured multi-location management produces at scale in 2026. Final Round AI (disclosure: same parent company as Hellyeah) saw 4.2x ROAS after moving to structured campaign architecture and automated bid optimization. Playco, a gaming company running multi-market campaigns, saw a 31% reduction in cost per install. BeFreed achieved a 38% reduction in CPI running performance campaigns across multiple markets simultaneously.

For agencies evaluating how to handle the structural overhead of multi-location clients, see how Hellyeah's AIMA handles campaign architecture decisions for accounts built on this structure.

Yulong He

Product

Product at Hellyeah. Designs the surface where people and automation share a workspace: what to expose, what to automate, what to leave alone.

Server Side Tracking Google Ads for Agency Clients

Server Side Tracking Google Ads for Agency Clients

How agencies implement server-side tracking for Google Ads: consent mode, enhanced conversions, GA4 server containers, and how Hellyeah X-Ray validates conversion coverage across client accounts.

Bharath
11 min read

Your next campaign, handled.

Hellyeah takes care of strategy, creative, and optimization.